Workshop · diagnostics and repairsWe reply the same day
Diagno.ee
Ignition and misfires

P0314 Misfire: on one cylinder (not specified)

By: · Updated:

P0314 means: Misfire: on one cylinder (not specified). Fuel isn't burning properly in a cylinder. Don't drive until the car has been checked. The engine could be damaged. The repair usually costs about €40–600 in Estonia. The most common cause: worn spark plugs. Other possible causes: faulty ignition coil, clogged or leaking injector.

Is it safe to drive?Don't driveDon't drive until the car has been checked. The engine could be damaged.
Typical repair cost€40–600parts and labour in Estonia

What it means

Fuel isn't burning properly in a cylinder. The engine runs unevenly and unburnt fuel can damage the catalytic converter. A number at the end shows the cylinder.

What you may notice

  • The engine jerks and shakes
  • Engine light flashing or on
  • Less power
  • Higher fuel consumption

What could be wrong

  1. 1Worn spark plugs
  2. 2Faulty ignition coil
  3. 3Clogged or leaking injector
  4. 4Air leak
  5. 5Low cylinder compression

Repair difficulty: Moderate

What you can check yourself

If the engine light is flashing, drive gently to the nearest safe stop. Swap the coils between cylinders and see whether the fault moves. You can check the simple things yourself, but the repair is best done in a workshop.

How we fix it

  1. We check spark plugs and coils
  2. We check injectors and air leaks
  3. If needed we test compression
  4. We replace the plugs, coil or injector

Standard SAE description: Single Cylinder Misfire (Cylinder not Specified)

This code usually comes with: Check engine lightSee what the light means →

Related symptoms: Car shaking or jerking

Want a definite answer?

Bring the car to our workshop in Estonia for diagnostics. We read the fault codes, test the sensors and tell you what is wrong. Repair price depends on the work involved, generally €45 per hour.

Book a diagnostic check

Questions

What does fault code P0314 mean?

Misfire: on one cylinder (not specified). Fuel isn't burning properly in a cylinder. The engine runs unevenly and unburnt fuel can damage the catalytic converter. A number at the end shows the cylinder.

Can I drive with code P0314?

Don't drive until the car has been checked. The engine could be damaged.

How much does it cost to fix P0314?

Roughly €40–600 in Estonia. The price depends on exactly what has failed and on the car.

How is P0314 fixed?

We check spark plugs and coils. We check injectors and air leaks. If needed we test compression. We replace the plugs, coil or injector.

Related codes

P0315Crankshaft position sensor: not learnedP0313Misfire: misfire with low fuel or fuel cutP2320Ignition coil secondary circuit: circuit fault ("G")P2321Ignition coil control circuit: signal or voltage too low ("H")P2322Ignition coil control circuit: signal or voltage too high ("H")P0420Catalytic converter no longer cleaning properlyP0008Crank/cam sync: reading or operation not right (bank 1)

Based on AI combined with our hands-on workshop experience and knowledge. This information is general and prices are approximate (Estonian workshop rates). The same code can mean different things on different cars. Only an inspection of the car gives a definite answer.

Book a diagnostic check