P2750 Speed sensor: reading or operation not right (intermediate shaft, "C")

By: Diagno editorial team · Updated: 2026-10-15

P2750 means: Speed sensor: reading or operation not right (intermediate shaft, "C"). The speed sensor gives the computer the vehicle speed. Drive gently and have the car checked soon. The most common repair costs about €90–180 in Estonia, depending on make and model. The most common cause: faulty speed or ABS sensor.

What it means

The speed sensor gives the computer the vehicle speed. If the signal drops out, the speedometer, gear changes, ABS or cruise control may misbehave. There is a signal, but the reading or operation isn't plausible. The cause may be the part itself or a real mechanical fault.

What you may notice

• Speedometer dead or jumping
• Automatic gearbox shifts wrongly
• Cruise control doesn't work
• Engine light on

What could be wrong

1. 1Faulty speed or ABS sensor · ABS sensor replacement €90–180
2. 2Sensor wire or connector · Sensor replacement €80–160
3. 3Sensor tone ring dirty or rusty · Sensor replacement €80–160
4. 4Gearbox or ABS module · Control unit check and software €150–300

Repair difficulty: Moderate

What you can check yourself

Check whether the speedometer works. If the ABS light is also on, the fault is probably in a wheel sensor. You can check the simple things yourself, but the repair is best done in a workshop.

How we fix it

1. We read the sensor on the diagnostic tool and compare it with other sensors
2. We check the connector, supply and ground
3. We repair the wiring or replace the sensor

Standard SAE description: Intermediate Shaft Speed Sensor C Circuit Range/Performance