Workshop · diagnostics and repairsWe reply the same day
Diagno.ee
Camshaft timing (VVT)

P0010 Fault in the camshaft adjuster valve wiring (intake)

By: · Updated:

P0010 means: Fault in the camshaft adjuster valve wiring (intake). The engine computer controls the camshaft adjuster valve so the valves open at the right moment. Drive gently and have the car checked soon. The repair usually costs about €80–300 in Estonia. The most common cause: adjuster valve connector is loose or corroded.

Is it safe to drive?Get it checked soonDrive gently and have the car checked soon.
Typical repair cost€80–300parts and labour in Estonia

What it means

The engine computer controls the camshaft adjuster valve so the valves open at the right moment. There is a break or short circuit in that valve's wiring or coil.

What could be wrong

  1. 1Adjuster valve connector is loose or corroded
  2. 2Wire is broken or chafed through
  3. 3Adjuster valve has failed

What you can check yourself

Check the adjuster valve connector. The valve sits at the front of the engine, at the end of the camshaft. You can check the simple things yourself, but the repair is best done in a workshop.

How we fix it

  1. We measure the valve resistance and wiring
  2. We repair the wire or replace the connector
  3. If needed, we replace the adjuster valve

Standard SAE description: "A" Camshaft Position Actuator Circuit (Bank 1)

Want a definite answer?

Bring the car to our workshop in Estonia for diagnostics. We read the fault codes, test the sensors and tell you what is wrong. Repair price depends on the work involved, generally €45 per hour.

Book a diagnostic check

Questions

What does fault code P0010 mean?

Fault in the camshaft adjuster valve wiring (intake). The engine computer controls the camshaft adjuster valve so the valves open at the right moment. There is a break or short circuit in that valve's wiring or coil.

Can I drive with code P0010?

Drive gently and have the car checked soon.

How much does it cost to fix P0010?

Roughly €80–300 in Estonia. The price depends on exactly what has failed and on the car.

How is P0010 fixed?

We measure the valve resistance and wiring. We repair the wire or replace the connector. If needed, we replace the adjuster valve.

Related codes

P0020Camshaft actuator: circuit fault ("A", bank 2)P0011Intake camshaft timing too far advancedP0012Intake camshaft timing too far retardedP0079Camshaft control solenoid: signal or voltage too low (exhaust, bank 1)P0080Camshaft control solenoid: signal or voltage too high (exhaust, bank 1)P0081Camshaft control solenoid: circuit fault (intake, bank 2)

Based on AI combined with our hands-on workshop experience and knowledge. This information is general and prices are approximate (Estonian workshop rates). The same code can mean different things on different cars. Only an inspection of the car gives a definite answer.

Book a diagnostic check